S&B Precision II: Filter Cleaning & Oil Kit (Red Oil)

Maximize the performance and longevity of your air filter. Works on any S&B filter and 95% of all other high performance air filters.

How To Properly Clean And Re-oil Your Air Filter

Step 1

Remove And Clean

Clean sealing area of filter and filter housing with a clean soft rag.

Tap the filter on a hard surface to remove and loosen large paricles and debris. (A soft brush may be used to loosen large particles of debris or bugs.)

Use S&B’s Filter Cleaner to clean the filter.

Gently rinse out the cleaner using low pressure water.

Let filter dry for at least 24 hours.

Step 2

Fill And Apply

Fill applicator with exact amount of oil required for your filter.

Starting 1/2 way from base make 2-3 passes around the circumfrence of the filter in the same area.

Repeat this process evenly spacing out the passes.

Step 3

Inspect And Install

Allow oil to bleed for 20-30 minutes.

Inspect the filter for any white areas the oil did not cover.

With the remaining oil in the applicator apply a small amount of oil to those white areas.

DO NOT over oil your filter.