Dynamic+ Lowering Springs were thoroughly evaluated on the street and track on 034Motorsport's B9 Audi RS5 Coupe Development Vehicle, and by independent Audi enthusiasts before release. The selected spring rates, unique dual-rate spring design, and ride height are the culmination of months of testing - thousands of miles of commuting and countless track days - resulting in a lowering kit that is perfectly matched to the factory dampers.
Through extensive testing and research, 034Motorsport Engineers concluded that the RS5's handling characteristics and weight distribution needed a more specific lowering spring with optimized spring rates, whereas the RS5 Sportback performs when best paired with the already optimized B9/B9.5 S4/S5 Dynamic+ Lowering Springs.
From the factory, the RS5 DRC (Dynamic Ride Control) suspension is characterized as “floaty” in the comfort drive mode, and too bouncy or stiff in Dynamic mode. The Dynamic+ Lowering Springs are optimized specifically for the B9 Audi RS5 to transform the ride quality, and handling characteristics, and enhance the driving experience. Each set of Dynamic+ Lowering Springs is manufactured in the USA at an ISO 9001-certified facility, and tested to 034Motorsport's exacting specifications to ensure they deliver unmatched levels of handling performance.
NVH Levels: None-Low
NVH is the measurement of how much noise, vibration, & harshness gets transmitted into the cabin of your vehicle. 034Motorsport Dynamic+ Lowering Springs transfer low amounts of NVH to the cabin in the form of mild road noise increases based on user feedback. Should you experience any other noises following your installation, confirm your installation was done properly with all components torqued to spec. As always, do not hesitate to email [email protected] if you have any questions following your installation. NVH is subjective so some users may find NVH to be increased or decreased from our rating.