Perfect tone, unlocked power and uncompromised daily driving manners. 

For the Q5 2.0T, we knew the tone and volume had to be spot on, given the varied environments this do-it-all vehicle finds itself in. It needed to deliver an eye-opening wail at full throttle yet be quiet and civil during part throttle, around town driving. Countless research and development efforts by our Fabrication and Engineering Departments have yielded the finest Q5 2.0T exhaust on the market.

Highlights:

• Featuring AWE Tuning 180 Technology™
• Crafted from mandrel bent T-304 2.5" Stainless Steel
• Dyno proven gains of +13 Horsepower and + 13 lb ft of Torque at the crank
• Available with Diamond Black 3.5" Slash Cut Tips
• Engineered, developed and tested in-house
• Optional Resonated Downpipe for a more aggressive sound

Sound Perfection: AWE Tuning 180 Technology™

As exhaust gases exit the 2.0T engine and flow into an AWE Tuning 180 Technology™ equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers.  The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.

The stock exhaust system is full of crimped tubing that hurts exhaust flow and robs horsepower. Our Q5 2.0T Exhaust was designed with smooth gradual bends and to eliminate any interruption to the flow of exhaust gasses. Our improvements to the exhaust path result in gains of +13 horsepower and +13 lb ft of torque at the crank.

Replacing the large, restrictive factory mufflers also has a pleasing effect on the engine note. Our exhaust systems give the 2.0T a civilized, more melodious voice, with specific attention paid to low rpm situations at part throttle.

Finishing it off

This system is topped off with notable 3.5 inch slash cut tips, available in Diamond Black. The tips sport engraved AWE Tuning logos and are double walled to ensure a mirror polish, even under hard usage. Each tip is individually adjustable, so stagger and depth into bumper can be set according to personal taste.

*** The item above, if not in stock, is build-to-order and may require additional shipping and handling time. If it is not designated as "IN-STOCK" above, then please call for an accurate ETA. Or, you may place your order and you will receive an ETA shortly thereafter.