Chemical Guys V4 All In One Polish And Sealant (16 Fl. Oz.)

V4 All in One Polish cuts away light imperfections, scratches, and swirls, finishes like a fine polish, restores lustrous shine and deep reflection, then adds a layer of protection in just one step.

Polish And Correct Paint In Less Time

Full polishing jobs can take countless hours. With V4, an entire car can be polished in a few hours in just one pass. For cars with light to moderate swirl marks, scratches, and defects, V4 is the perfect polish that compounds and finishes in one step. The diminishing abrasives cut fast to remove swirls, scratches, and oxidation, then finish like a fine polish to create a wet mirror finish!

Polish + Shine + Seal

A newly polished surface needs to be protected, which is why V4 lays down a layer of sealant with every pass of your DA or rotary machine. V4 adds synthetic sealant technology to seal and protect the surface from contamination, UV rays, bird droppings, insects, and water spots. Full polishing detail jobs can take countless hours. Use V4 for a mirror finish and durable protection in just one pass! 

Use This Polish To: 

• Produce exceptional shine in no time
• Protect your paint with premium sealants
• Add durable protection against the elements
• Save time by polishing and sealing at once
• Cut hard and refine the finish in one easy step

How To Use It:

Dual Action Polisher

• Shake well and apply 4-5 drops to desired pad. 
• Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
• Turn on machine on paint to speed setting 1 to spread product. 
• Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
• Follow with light pressure to finish. 
• Remove residue with a clean microfiber towel.
• Please Note: Always try a test spot before use. 

Rotary Polisher

• Shake well and apply 4-5 drops to desired pad. 
• Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
• Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product. 
• Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
• For final pass adjust speed setting to between 1200-1800 rpms.
• Work until optical clarity is achieved.
• Remove residue with clean microfiber cloth.