Chemical Guys VSS Scratch And Swirl Remover (16 Fl. Oz.)

VSS Scratch & Swirl Remover is the easy-to-use polish that cuts strong to quickly remove swirls, scratches, and defects, then finishes like a fine polish to deliver a mirror finish in just one step. 

Produce Exceptional Shine in One Step

Not every car requires a 3-step polishing job. For cars with light to moderate swirl marks, scratches, and defects, VSS is the perfect one-step polish that cuts hard like a compound and then finishes in like a fine polish to restore a lustrous shine and deep reflection in a fraction of the time of standard 2 or 3 step polishes. It’s the fastest way to get a mirror like shine on all types of paint!

Formulated for Fast Work Time

The advanced polish is formulated using diminishing abrasive technology. These innovative abrasives cut fast to quickly remove swirls, scratches, oxidation, and 2500 grit sanding marks, then finish like a fine polish to create a wet mirror finish on painted surfaces. VSS restores a lustrous scratch-free finish without filling in or covering up swirls, scratches, or defects.

Use This Polish To: 

• Cut hard and refine the finish in one easy step
• Restore a mirror-like shine to your paint
• Save time and product with amazing results
• Quickly and easy remove scratches and swirls
• Restore lustrous shine and deep reflection

How To Use It:

Dual Action Polisher

• Shake well and apply 4-5 drops to desired pad. 
• Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
• Turn on machine on paint to speed setting 1 to spread product. 
• Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear.
• Follow with light pressure to finish. 
• Remove residue with a clean microfiber towel.
• Please Note: Always try a test spot before use. 

Rotary Polisher

• Shake well and apply 4-5 drops to desired pad. 
• Prime pad with Pad Conditioner. Dab product out evenly across 2' x 2' section. 
• Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product. 
• Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
• For final pass adjust speed setting to between 1200-1800 rpms.
• Work until optical clarity is achieved.
• Remove residue with clean microfiber cloth.