Introducing the all-new GENIUSPRO25, a 6-volt,12-volt, and 24-volt fully-automatic professional smart charger, maintainer, power supply, and battery-desulfator with temperature compensation rated at 25-amps for all types of automotive, marine, and deep-cycle batteries.
The all-new start-voltage sensor allows the GENIUS to detect and charge dead batteries as low as 1-volt. For extremely dead batteries lower than 1-volt, manually turn on force mode to detect and charge batteries all the way down to zero volts.
A multi-functional design that allows you to charge in more ways. Effortlessly charge multiple battery voltages (6-Volt, 12-volt, and 24-volt) for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion.
The new integrated thermal sensor automatically monitors and adjusts the charging cycle based on fluctuations of ambient temperature, limiting the chance of under-charging or over-charging, providing a more accurate and fully charged battery. Avoids under-charging in cold weather down to -4 F and avoids over-charging in hot weather up to 122 F.
The all-new GENIUS automatically detects sulfation/acid stratification. If any is found, the GENIUS will automatically repair and reverse the damage done to the battery, extending the usable life and increasing performance for stronger engine starts. Plus, cutting-edge battery repair modes for 6-volt, 12-volt, and 24-volt batteries.
A dual-voltage power supply - 12-volt (25-amp) and 24-volt (12.5-amp) - to maintain constant power delivery without unwanted ripple, noise, and transient spikes during ECU flashing, reprogramming, and diagnostic testing.
The GeniusPRO25 is equipped with a reduced charge current mode that allows the unit to operate at 5A for optimized charging of smaller batteries or continual maintenance.
Finally a charger from start to finish that’s completely automatic. No special modes, no technical knowledge required. Genius will safely charge any battery. Detect damaged batteries and intuitively repair them. And actively monitor for long-term battery maintenance and extend battery life. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery.
Genius clamps are built with needle-nose profiles for smaller terminal applications and detachable integrated eyelets for permanent mounting the accessory to battery. Designed to fit battery terminals of any shape and size. Engineered for improved clamping range, clamping force, and higher conductivity.
Features:
What's In The Box
Technical Specifications
Operating Requirements
Line Voltage: 100V to 240V AC
Frequency: 50Hz to 60Hz
Operating Temperature: -4° to 122° F (-20° to 50° C)
Storage Temperature: -22° to 140° F (-30° to 60° C)
Charging
Current: 25A (6V, 12V), 12.5A (24V) DC
Voltages: 6V, 12V, 24V
Chemistry: Lead-Acid and Lithium
Types: Wet, Gel, MF, CA, EFB, AGM, Lithium
Capacity Range: (6V and 12V) Up to 1000Ah, (24V) Up To 500Ah.
Maintenance: All Battery Sizes
Power
Consumption: 375 W Max
Safety
Short-Circuit: Yes
Open-Circuit: Yes
Overheating: Yes
Overcharge: Yes
Spark-Proof: Yes
Reverse Polarity: Yes
Size
Height: 5.16 Inches (13.1 cm)
Width: 9.21 Inches (23.4 cm)
Depth: 2.95 Inches (7.5 cm)
Weight: 2.7 lbs (1.22 kg)
Cord Management
DC Cable: 5.4 Feet (1.6m)
DC Extension Cable Length: 10 Feet (3m)
DC Cable Size: 8 AWG
DC Fuse Size: 30 AMP ANL Fuse
AC Cable Length: 6 Feet (1.8m)
AC Cable Size: 18 AWG
Oil, gas, grease, water, chemical, UV, abrasion resistant
IP Rating
IP20
Limited Warranty
3-Year Hassle-Free Warranty