SPULEN Competition Coilover Suspension Kit For VW MK7/MK7.5 & Audi A3/S3

 

Brand Description:

 

One of USP Motorsports' in-house brands, Spul Engineering produces go-fast parts for VW and Audi vehicles. With Spulen parts you get more efficient operation, so your tuned car shifts smoother, accelerates faster, and handles better.  Spulen offers products such as bolt-on manual transmission mods, dog bone mounts and inserts, turbo inlet and boost pipes, oxygen sensor extenders for test pipes, wheel spacers and bolts, blow off valve kits for MQB MK7 applications, and rear differential mounts for Audi vehicles.

 

Product Description:

 

After years of extensive development, we've finally completed the Spulen Competition Coilover kit for all MK7 Golf/GTI/R and Audi A3/S3 MQB applications. Since our initial prototype was installed on our MK7, we've dedicated tremendous resources and ran through comprehensive stress testing to ensure this kit handles anything we throw at it. Exhaustive track testing, real-world environment with good and bad asphalt conditions, different environments with extreme heat and cold days and just about any condition we could think of. 

 

In addition to real-world testing, our competition struts have also ran on our durability dyno for weeks while we took constant temperature readings and inspected continuous compression and rebound effectiveness. Our monotube construction struts and improved combined compression rebound valve ensures a long life, problem-free operation. 

 

These coilovers feature a 32-way adjustable stiffness to suit your hard or soft ride quality needs. Our factory default stiffness is set to 20/32, which we've found to be the sweet spot between performance and ride quality. We've also adjusted the front spring pre-load for optimum ride quality at the adjusted ride height. However, please note each height adjustment is dependent on your car's setup.  Adjustment is required after install to best suit your needs according to the configuration of your car.

 

Features: 

• Monotube Construction For Durability and Rigidity
• Approximate Front Lowering: 1.25"-2.50"
• Approximate Rear Lowering: 1.00"-2.25"
• 32-way Adjustable Dampening
• Fully threaded Front & Rear Struts
• Pre-Adjusted Spring Pre-Load
• Hard-Anodized Aluminum Locking Rings
• Ball-bearing Vulcanized Rubber Strut Mounts

 

When adjusting ride height, please note every 5 full rotations equals 10mm. For the rears, when looking from the bottom up at the strut, clockwise equals softer, counter-clockwise equals harder. 

 

Fitment (Non-DCC Models): 

• Volkswagen GTI MK7 2.0T (2015-2017)
• Volkswagen GTI MK7 2.0T (2018-2019)
• Volkswagen Golf R MK7 2.0T (2015-2017)
• Volkswagen Golf R MK7 2.0T (2018-2019)
• Volkswagen Golf MK7 2.0T (2015-2019)
• Volkswagen Golf MK7 1.8T (2015-2019)
• Volkswagen Alltrack 2.0T (2015-2019)
• Audi A3 (8V) 2.0T (2014-2019)
• Audi A3 (8V) 1.8T (2014-2019)
• Audi S3 (8V) 2.0T (2015-2019)
• Audi RS3 (8V) (2017-2020)

Installation Notes

*** NOTE: Vehicles equiped with Dynamic Chassis Control (DCC) will require disabling or deleting this feature for proper functionality.