Spulen Wheel Spacer Pair & Bolts  - 15mm (Titanium) - Porsche Hub

From the factory, the wheels on your vehicle are sucked into the wheel wells. The Spulen Flush Kit was assembled specifically to bring your stock wheels outward and flush with your car’s wheel wells. Designed to work with the factory style wheels, the flush kit will give your car the clean look it was missing from the factory. 

By spacing your wheels outward you will also experience an increase in handling and in some cases traction. The Spulen wheel spacers are CNC’d from billet aluminum and feature a hard anodized finish for durability. Each spacer is modeled after the factory wheel hub to provide a perfect fitment and features a notched back for easy removal from the wheel hub. Everything you need to widen the stance is included. These are sold in pairs, so be sure to include a quantity of (2) for all 4 wheels. The rear wheels usually require a wider spacing, therefore we also offer bigger spacers. The usual setup consists of a 7mm pair in the front & 15mm in the rear. Be sure to confirm fitment prior to your purchase. 

Titanium bolts are 50% lighter than the typical steel bolt, providing your vehicle with a lower rotating mass. This results in a quicker acceleration all around and lowers overall fuel consumption. The weight savings in the rotating mass are equally important as lightweight wheels, but at a fraction of the cost. The weight savings can be compared to a stationary weight reduction in the vehicle of approximately 35-40lbs in most cars. Corrosion resistant and strength tested makes these a must have for any performance enthusiasts. Built with approximately 42% more pressure than a steel bolt, the strength is significantly upgraded. 

Included In This Kit:

(2) 15mm (Porsche) Wheel Spacers 

(10) 63mm titanium wheel bolts 

(1) Anti-Seize Packet per Pair of Spacers

Tools for the Job:

Be sure to keep your wheels from scratching by using the Wurktol 3 piece Wheel Socket kit. Features a plastic coating to prevent your wheels from getting scratched during wheel bolt removal. 

17638 - Wurktol 3-Piece Wheel Socket Kit

Also use the Wurktol Wheel Guide Tool to hold the wheel up while removing. Just remove the first bolt, thread this tool in and vualá! Now you don't need to worry about the wheel falling when you remove the last bolt. 

17633 - Wurktol Wheel Guide Tool - M14X1.5