StopTech Performance Slotted 2-Piece Front Big Brake Kit (ST-60) - Yellow Calipers

These Balanced Brake Upgrades® put StopTech on the enthusiast map. They maintain factory bias while providing shorter stopping distances, better modulation and less brake fade. They include stiffer StopTech calipers, larger-than-stock 2-pc StopTech AeroRotors,  StopTech Street Performance Pads and  StopTech Stainless Steel Lines. 

Specifications:

• Caliper Color: Yellow
• Caliper Construction: Fixed
• Caliper Type: 6-Piston
• Caliper Series: ST-60
• Minimum Wheel Diameter Required: 482.6mm (19")
• Driving Style: Performance / Racing, Track Only
• Rotor Thickness: 32mm (1.26")
• Outside Diameter: 380mm (14.96")
• Rotor Construction: 2-Piece
• Rotor Material: Cast Iron
• Rotor Style: Slotted
• Rotor Type: Vented
• Rotor Coating: Zinc Coated
• Rotor Finish: Slotting, Yellow Zinc
• Series: Performance

Features:

• The stiffest aftermarket caliper available gives a consistent firm pedal
• Fully machined and lightweight for track action
• Fully forged and extremely stiff for firmer brake pedal feel
• Meticulously engineered 2-piece design reduces flex
• Patented, removable center bridge further resists yaw(flex)
• Carefully selected piston sizes for precise torque output
• Specifically engineered and patented AeroVanes for optimum cooling
• Patented, billet 7075 aluminum AeroHats for improved airflow
• Full-floating mounting hardware to eliminate pad knock-back
• Optimized to provide even performance and consistent feedback
• Hard-anodized hats are impervious to color change or fading
• Stainless steel studs secured with set screws for strength and durability
• Fully machined aluminum or steel that is precise and strong
• Application specific design for precise and proper fitment
• Stainless steel braiding for lower compliance and extra protection
• A variety of fittings for hundreds of applications
• All necessary brackets and fasteners for easy installation
• Better brake modulation
• Patented design with directional standoffs between the rotor and mounting bell
• Increases airflow by 50%-100% over traditional 2-piece designs
• Increased airflow reduces the temperature difference between the inside and outside rotor faces
• Results in less distortion and better performance compared to other fully floating designs
• Outer pad wear is reduced

Benefits:

Slots create an escape route for debris, dust, gases, and water

Slots reduce stopping distances in wet weather

Slots clean and de-glaze pad surface for optimum pad coefficient of friction

Slots help to increase pad bite and improve air circulation

Vented type of rotors offers much faster heat dissipation

Multi-piston calipers provide clamping force on both sides of the rotor at the same time and uniformly transfer braking force to the brake pads

Caliper pistons are hollow to save weight

Aluminum caliper body allows for exceptional lightweight (up to 40% of weight savings) and ensures superior corrosion resistance

Caliper heat-resistant coating prevent cracking and fading

Fixed calipers create friction from the brake pads on both sides of the rotor at a minimum time interval

StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing a consistent pedal feel and confidence-inspiring responsiveness. The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. Every StopTech Balanced Big Brake Kit is engineered to produce that optimal balance using caliper bores and pistons specifically selected and tested for each vehicle application. This is what sets StopTech apart from off-the-shelf solutions. In contrast, a brake upgrade that adds too much front torque (as many do), will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input.

They include forged, lightweight StopTech ST calipers, floating, slotted AeroRotors, stainless steel brake lines, and race engineered caliper brackets. StopTech Performance Kits feature ultra-high performance ST lightweight forged calipers in six-piston, four-piston or two-piston configurations.

StopTech® has been awarded the highly coveted TÜV approval on several big brake kits. StopTech kits successfully passed TÜV’s demanding series of tests that range from performance and durability to proper fitment and ease of installation. Although TÜV certification is not required in all countries, TÜV approval demonstrates that StopTech’s Balanced Brake Upgrades meet the rigorous standards set by this respected German Agency. StopTech Big Brake Kits have been awarded a Teilgutachten. The complete kit is certified to run on a particular application, so customers do not need to pay for further testing with the TÜV agency.